Description
The SEY-DL6 Controller Display was designed and made with 6 digits for better control of the load as well as presenting the values of weights and angles of loads on the crane sheave, gantry, electrical cable hoists of steel cable. To visualize the values of both weight and lifting angle, it is necessary for the display to work with a load cell and inclinometer.
The equipment comes with 3 programmable relays for load control and can work with overload, slack cable and auxiliary functions, limiting the device’s up and down movements;
The SEY-DL6 is sold in two voltage ranges, 85~265 Vac (SEY-DL6RA) or 24~36Vdc (SEY-DL6RC). It can also work with signal repeater display (SEY-DRS6) to present the weight values in two different displays.
Solution for:
- overhead crane;
- Lifting and cargo handling;
- monorails;
- gantries;
- Semi gantries;
Functionalities:
The display receives the load cell signals and converts them into mass values (kg / t). The weight shown on the display is compared by the programmer to the maximum weight previously informed and when reaching it activates or deactivates the specified relays. It can also receive signals from the inclinometer and flash the angles of the block.
It can be connected together with a signal repeater display (SEY-DRS6) to repeat the weight values on both displays.
